Call Today

 

 

How do you actually feel when it comes to Hot Water Heater Repair?

Numerous modern-day houses utilize an electrical hot water heater for their heating unit, as a result of its comfort and convenience of use. Nevertheless, just like any other electric home appliances, problems may arise with its usage, all of a sudden. It can be truly frustrating to get up to a cold shower as opposed to a hot one or having your bathroom with water that isn't hot adequate and even too warm. Whatever the case might be, water heater troubles can be quite aggravating. Thankfully, we have actually made a list of feasible remedies to your water heater concerns. There are a number of factors that could create a lot of these troubles, it could be a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for safety and security. Whatever the problem is, getting it repaired need to not position way too much of an issue if you comply with these actions:

 

Check Your Power Supply:

As fundamental as this might seem, it is extremely essential. Without sufficient power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to confirm that it isn't a power issue. Inspect if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, just transform it on and off once again. Change any broken or damaged fuse. Examine the appliance with power after these modifications to see if it's currently functioning.

 

Check the Heating Element in the Hot Water Heater:

If it's not a power trouble, then attempt looking into your burner if it is still functioning. Check each of your heating elements to make sure the issue isn't with any of them. If any of them is faulty, change that component and after that inspect whether the hot water is back on.

 

Examine Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature level setups on your upper thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open up the gain access to panel as well as press the red button for temperature reset above the thermostat. This ought to help heat the water. Turn the circuit breaker back on and also check if the trouble has been resolved.

 

Call A Professional:

If after replacing all damaged components and also resetting your temperature level, the hot water heater still isn't working, you may need to contact a specialist plumber for a specialist viewpoint. The issue with your heater could be that the hot and cold faucets have actually been changed or it may be undersized for the amount of warm water required in your home. Whatever the case might be, an expert plumber would help solve the trouble.

 

Final thought

Water heater problems are not constantly significant. A number of them are because of minor concerns like a blown fuse or damaged heating element. Replacing the damaged components ought to do the trick. Nonetheless, if you are still not able to solve the trouble, give a call to your nearby plumber to find to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Do you really like reading about How to Troubleshoot and Repair an Electric Water Heater? Leave a remark directly below. We'd be interested to know your thoughts about this piece. We hope that you come back again in the near future. Appreciated our article? Please share it. Let others locate it. I praise you for your time. Come back soon.

Book A Free Estimate